Home

MK484 high quality AM radio

The page you requested does not exist. A search for radio frequency mk484 am radio receiver resulted in this page.

Very simple , sensitive and high quality AM radio circuit can be make with MK484 monolithic integrated circuit with very few external components.
Main features of the circuit MK484 include low supply voltage operation and low drain current .
mk484 maximum rating
mk484 characteristics
The MK484 device is particularly suited to small hand-held radios.
This MK484 AM radio circuit provides a complete solution including : RF amplifier, Detection and AGC circuit (automatic gain control ), which requires only a few external components to give a high quality AM Tuner.

No setting up or alignment is required and the circuit is completely stable in use.
The circuit has an input impedance of 4Mohms and operates over a frequency range of 150KHz to 3MHz. The IC will run with DC supply between 1.1V and 1.8V typical 1.4V and a current drain of 0.3mA makes it suitable for battery operation.
The output signal is to low to drive a speaker ( typical from 40 to 60 mV ) and is necessary a audio power amplifier .

The coil needs approximately 55 turns of 0.315mm diameter enamelled copper wire on a 100mm long ferrite rod.
mk484 pinoutMK484 AM radio circuit electronic project